Productos
3 KG standard continues rotation servo
Servo de rotación continua, torque 3kg.cm.
COD: FTFS5103R
Peso: 0.036 Kg
Disponibilidad: En Stock
ARS 16196.00
El producto no está disponible para la venta en este momento
Características
DESCRIPTION
This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.
To control with an Arduino, we suggest connecting the control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position "90" (1.5ms pulse) is stop, "180" (2ms pulse) is full speed forward, "0" (1ms pulse) is full speed backwards. They may require some simple calibration, simply tell the servo to 'stop' and then gently adjust the potentiometer in the recessed hole with a small screwdriver until the servo stops moving.
TECHNICAL DETAILS
- Operating Voltage: 4.8V~6V (5V works best)
- Average Speed: ~0.18sec/60°
- Stall Torque (4.8V): 3kg.cm/41.74oz.in
- Stall Torque (6V): 3.2kg.com/44.52oz.in
- Required Pulse: 500us-2500us
- Connector Wire Length: 30cm / 11.8"
- Dimensions: 37mm x 54mm x 20mm / 1.5" x 2.1" x 0.8"
- Weight (no horns): 40g
- Spline Count: 25
Galería de Imágenes
Galería de Videos
Comentarios
Escribir ComentarioOpenHacks (07/06/2016 - 12:08)
Hola Daniel, el sentido puede elegirse. En la descripción del producto hay un link con un ejemplo. Saludos!
Daniel (06/06/2016 - 22:28)
Hola! Por que dice dirección antihoraria(CCW)? Acaso solo pueden girar en un solo sentido o este puede elegirse? Gracias
